Rice Lake Ranger 3 Variable Range Simulator

Click image to enlarge and zoom.
Dimensions
4.5 × 3.5 × 1.25 in
Delivered product may vary depending on model and options selected.
Tools & Testing Equipment
Rice Lake Ranger 3 Variable Range Simulator
- Test indicator response with nine calibrated load-cell signal settings from −0.5 to 4.5 mV/V.
- Use the rotary switch to select a fixed output with 350 Ω nominal bridge impedance.
- Connect with banana plugs or up to 14 AWG wire at the binding posts.
- Add the optional four-foot banana-plug cable when your setup needs it; sold separately.
This product includes configurable options. Choose add-ons and field selections before continuing.
Files & Downloads
Unless otherwise noted, referenced media is copyright Rice Lake Weighing Systems or other credited rights holders. Media rights
Ranger Series Load Cell Simulators Operation Manual, Rev. APDFRanger 3 Catalog PagePDFRice Lake Ranger 3 Variable Range Simulator
Nine-setting load cell simulator for indicator testing from −0.5 to 4.5 mV/V, with a 350 Ω nominal bridge and binding-post connections.
Use the Ranger 3 to test indicator offset and gain with its fixed, calibrated outputs. The optional four-foot banana-plug cable (21116) is sold separately.
Related Products
View all Tools & Testing Equipment
Tools & Testing Equipment
Rice Lake Transducer Simulator 4
Use the Transducer Simulator 4 for indicator testing and setpoint or batching setup.

Tools & Testing Equipment
Rice Lake Ranger 1 Variable Range Simulator
Continuously variable 0–3 mV/V load cell simulator for indicator setup and troubleshooting, with a ten-turn control and 700 Ω nominal bridge.

Tools & Testing Equipment
Rice Lake Ranger 5 Variable Range Simulator
Nine-setting load cell simulator with a locking ten-turn vernier for fine, medium or coarse indicator testing adjustments.
